Shelterbelt Planning and Design

 
  From the May 1, 2017 Issue of Agri-News
Subscribe to our free E-Newsletter, "Agri-News" (formerly RTW This Week)Agri-News
This Week
     Agri-News HomeAgri-News Home
 
 
 
 Tree and shelterbelt planting is a long-term investment that requires careful planning and design. “You have to ask yourself what you want to accomplish by planting trees or shelterbelts on your property,” says Toso Bozic, woodlot extension specialist, Alberta Agriculture and Forestry. “And you should involve all family members in this process to bring in their ideas, thoughts, and values.”

Bozic says trees should always be managed with future generations, as well as immediate needs, in mind. “The goals can be many, ranging from wind protection, reducing energy costs, increasing property values, providing visual barriers and privacy, increasing biodiversity of wildlife species, retaining water, and many others goals. All of these can be achieved if you plan and design properly.”

The first step, says Bozic, is to visit existing shelterbelts and tree planting in the local area. “Visit already-established shelterbelt and windbreaks, and talk to landowners about what did or not work on their property. That’ll give you valuable information about potential soil and water problems, maintenance requirements, cost, potential issues, tree growth, reasons to choose different species, and various spacing and weed control issues.”

For proper design and planning, the most important tools are a pencil and eraser. “I can’t stress enough that you can change anything on paper, but once you put trees in the ground, changes are costly. You are in a unique position to create something that can be in harmony with nature, but at same time very different.”

Proper planning and design includes several steps:

  • Find an area to plant that combines effective protection from wind and snow with the functional design possibilities to increase aesthetic value.
  • Use an aerial photograph from your local county office or Google Earth to draw a map for the design.
  • Once the mapping is complete, collect as much information as possible on soil type, drainage, slope, prevailing winds, sunlight exposure, property lines, power and other utility lines, buildings, roads, etc.
  • When the site assessment is complete, choose the tree and shrub species. “The key thing is to diversity,” says Bozic. “Many people just choose very few species such as spruce, hybrid poplar, and lilac. There is nothing wrong with any of these species, but there is a higher long-term risk for your trees if you only plant a few species. Plant a variety of trees and shrubs on your property. Each species provides unique beauty and benefits, as well as challenges. Diversity is key for the long-term viability of your shelterbelts.”
  • In natural forests there are no “recommended” spacing as trees, through competition based on site abilities, provide their own best spacing. “While you have to watch for the functionality and effectiveness of your shelterbelt, whether you plant every 8, 10, or 12’ between trees is really up to you. Also, you do not need to plant in straight rows. Be creative!”
Once design, site assessment, trees and shrub choice, and spacing requirements are complete, it’s time for the hard work of site preparation and tree planting, followed by ongoing maintenance.

“Planning and design is probably the most crucial steps in the long journey of establishing trees and shrubs on your property,” adds Bozic. “It takes detail and thought, but is also fun where the creativity and wisdom of your family creates something unique and joyful.”

Contact:
Toso Bozic
780-415-2681
 
 
 
 
view Agri-News RSS FeedAgri-News RSS Feed      Share via AddThis.com

For more information about the content of this document, contact Toso Bozic.
This document is maintained by Ken Blackley.
This information published to the web on April 20, 2017.